Gratis verzenden > € 250 incl.btw
UltiMaker specialist
Onderhoud en reparaties Ultimaker
Persoonlijk advies sinds 2014

Ultimaker S3 € 3.999 VAT excl.

  • Information
  • Specifications
Delivery time: On demand

The Ultimaker S3 is the most reliable industrial-grade 3D desktop printer available for professional 3D printing. Professional use: minimal down time, wifi, automatic bed-leveling, pre-set profiles, integrated hardware, software and materials configuration and camera. 

In order to start quickly at a professional level: ask for our training and installationservice.

The Ultimaker S3 is the smaller version of the S5 with a buildvolume of 230 x 190 x 200 mm. Many of the best features from the Ultimaker S5 combined into a smaller, more affordable device. The Ultimaker S3 delivers the same high-quality, composite-ready dual extrusion, with the same market-leading reliability and ease of use.

Key aspects Ultimaker S3

From the ground up, every detail of the Ultimaker S3 has been designed and built to deliver the S-line print quality you would expect. Inside the Ultimaker S3, you'll find:

  • Reinforced feeder wheels made from coated, hardened steel. These enable abrasion-resistant 3D printing for high-strength parts using glass or carbon fiber composites (when paired with Ultimaker print core CC Red)
  • Dual filament flow sensors that increase your print success rate. If you run out of filament, they pause your print and notify you to add a new spool
  • Advanced active leveling that ensures easy and reliable first-layer adhesion. Begin a print job and get on with your work, thanks to precise build area probing and Z-height build plate compensation at the start of every print job
  • High-accuracy stepper drivers taken directly from the Ultimaker S5. These high-precision drivers are quieter than the Ultimaker 3 and run more reliably to consistently provide high-quality prints


Beyond that, the Ultimaker S3 has been further optimized for its form factor. These small features work together to improve the 3D printing experience:

  • Rigid printer frame reduces small vibrations (or ringing) while printing to improve overall print quality
  • Single glass door with a magnetic latch provides a more controlled build environment and reduces the risk of warping or delamination
  • Optimized internal design allowing both dual extrusion nozzles to reach the whole build area, and maintaining a high build-volume-to-size ratio
  • Internal power supply removes the need to make space for a power brick. It also makes the setup process easy across all S-line 3D printers


Technology: Fused Filament Fabrication (FFF)
Print Head: Dual extrusion print head with a unique auto-nozzle lifting system and swappable print cores
Build Volume: Left nozzle: 215 x 215 x 200 mm <br>Right nozzle: 215 x 215 x 200 mm <br>Dual material: 197 x 215 x 200 mm
Filament Diameter: 2.85 mm
Layer Resolution: 0.4mm nozzle: 20 - 200 micron
XYZ Accuracy: 12.5, 12.5, 2.5 micron
Print Head Travel Speed: 30 - 300 mm/s
Build Speed: 0.40 mm nozzle: up to 16 mm3 /s
Build Plate: Heated glass build plate
Build Plate Temperature: 20 - 100 ºC
Build Plate Leveling: Active leveling
Supported Materials: Nylon, PLA, ABS, CPE, PVA
Nozzle Diameter: 0.4 mm
Nozzle Temperature: 180 - 280 ºC
Nozzle Heat Up Time: < 2 min
Build Plate Heat Up Time: < 4 min (20->60 ºC)
Operating Sound: 50 dBA
Material Recognition: Material recognition with NFC scanner
Connectivity: Wi-Fi, LAN, USB
Monitoring: Live Camera
Dimensions (incl. Bowden tube and spool holder): 342 x 505 x 588 mm (DxWxH)
Dimensions (excl. Bowden tube and spool holder): 342 x 380 x 389 mm (DxWxH)
Nett Weight: 10.6 kg
Shipping Weight: 15.5 kg
Shipping Box Dimensions: 390 x 400 x 565 mm (DxWxH)
Input: 100 - 240V<br>4A, 50-60Hz<br>221 W max.
Output: 24 V DC, 9.2 A
Operating Ambient Temperature: 15 - 32 ºC <br>10 - 90 % RH non-condensing. From ±50% RH and up you will get problems with PVA.<br>See material specifications for optimal operating conditions
Storage Conditions Printer: Storage Conditions Printer
Supplied Software: Cura, our free print preparation software
Supported OS: macOS, Windows, Linux
File Types: STL, OBJ, 3MF
0 stars based on 0 reviews
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »
Powered by Lightspeed