Gratis verzenden > € 250 incl.btw
UltiMaker specialist
Onderhoud en reparaties Ultimaker
Persoonlijk advies sinds 2014

Light Grey PLA 2.85mm 750g

* Unit price: €21,45 / Piece
  • Information
Delivery time: in stock


PLA or Polylactic acid is a biodegradable thermoplastic made from biological resources such as corn starch. It melts at a lower temperature than ABS and is alot more forgiving. Therefore every roll keeps its specific filament width throughout the entire length leading to less extruder jams and higher quality and accuracy in your printed parts.

Our excellent quality PLA is specially formulated for much higher tensile strength and great interlayer adhesion. We have a wide range of colors designed to match the RAL color system. Our superior production process ensures every roll keeps its specific filament width throughout the entire length leading to less extruder jams, a higher quality finish and more accuracy in your printed parts.


  • Prototypes, visual models, unique or small series productions.
  • Finishing processes such as sanding, cutting or drilling are possible. Parts can be attached using standard super glue and similar adhesives.
  • PLA 3D printed objects can be cleanly burn out of plaster molds in an oven, leaving a mold which can be used with metals. This technique is called "lost PLA casting".


  • Stronger and less fragile than normal PLA.
  • Easily printable at low temperature.
  • 3D printing directly on a heated bed or non-heated bed. Good non-heated bed adhesion is achieved using blue painters tape or dedicated solutions such as Build Tac.
  • It is safe to use.
  • Virtually no warping.
  • Biodegradable.
  • Low odor.


  • Weaker than various engineering plastics.
  • PLA can melt at relatively low temperatures (around 55 degrees) and is less suitable for outdoor use.


Color: Red (about RAL ca. 3020)
Material Type: Polylactic Acid
Weight per coil: 750 gr
Print temperature: 180-210 ° C
Melt temperature: 210 ° C (± 10 ° C)
Print speed: 25mm / s - 250mm / sec
Recommended printbed temperature: ± 35-60 ° C
Diameter tolerance: 1,75mm: ± 0.05 mm / 2,85mm: ± 0.10mm
Roundness: ≥ 95%
Density: 1.24 g / cc
Tensile strength: 110 MPa (MD) / MPa 145 (TD)
Elongation at break: 160% (MD) / 100% (TD)
Tensile modulus: 3310 MPa (MD) / 3860 MPa (TD)
Impact resistance: 7.5 kJ / m²
Melting point: 145-160 ° C

0 stars based on 0 reviews
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »
Powered by Lightspeed