- Informatie
- Specificaties
Levertijd: | Bel voor actuele levertijd |
De nieuwe UltiMaker S3
Ultimaker staat voor professioneel gebruik: minimale down time, wifi, automatische bed-leveling, vooraf ingestelde profielen, geïntegreerde hardware, software en materialen configuratie en camera.
Voor snel en professioneel starten: vraag naar onze training en installatieservice.
De Ultimaker S3 is de kleinere en goedkopere versie van de S5. Bouwvolume 230 x 190 x 200 mm. Verder dezelfde hoge kwaliteit, composite-ready dual extrusion, gebruiksgemak en betrouwbaarheid.
Key aspects Ultimaker S3
From the ground up, every detail of the Ultimaker S3 has been designed and built to deliver the S-line print quality you would expect. Inside the Ultimaker S3, you'll find:
- Reinforced feeder wheels made from coated, hardened steel. These enable abrasion-resistant 3D printing for high-strength parts using glass or carbon fiber composites (when paired with Ultimaker print core CC Red)
- Dual filament flow sensors that increase your print success rate. If you run out of filament, they pause your print and notify you to add a new spool
- Advanced active leveling that ensures easy and reliable first-layer adhesion. Begin a print job and get on with your work, thanks to precise build area probing and Z-height build plate compensation at the start of every print job
- High-accuracy stepper drivers taken directly from the Ultimaker S5. These high-precision drivers are quieter than the Ultimaker 3 and run more reliably to consistently provide high-quality prints
Features
Beyond that, the Ultimaker S3 has been further optimized for its form factor. These small features work together to improve the 3D printing experience:
- Rigid printer frame reduces small vibrations (or ringing) while printing to improve overall print quality
- Single glass door with a magnetic latch provides a more controlled build environment and reduces the risk of warping or delamination
- Optimized internal design allowing both dual extrusion nozzles to reach the whole build area, and maintaining a high build-volume-to-size ratio
- Internal power supply removes the need to make space for a power brick. It also makes the setup process easy across all S-line 3D printers
Technologie: | Fused Filament Fabrication |
Printkop: | • Dubbele nozzle, met tilmechanisme op de tweede nozzle <br>• Eenvoudig te verwisselen print cores |
Werkvolume: | Linkernozzle: 215 x 215 x 200 mm <br>Rechternozzle: 215 x 215 x 200 mm <br> Dubbel materiaal 197 x 215 x 200 mm |
Materiaal: | 2,85 mm |
Laagresolutie: | 0,4 mm-nozzle: 20 - 200 micron |
Nauwkeurigheid stap X, Y, Z: | 12,5, 12,5, 2,5 micron |
Bewegingssnelheid printkop: | 30 - 300 mm/s |
Snelheid materiaaldoorvoer: | Tot 16 mm3 /s |
Platform: | Verwarmde glasplaat |
Platformtemperatuur: | 20 - 100 ºC |
Platform kalibreren: | Actieve en handmatige kalibratie |
Typen materiaal: | Nylon, PLA, ABS, CPE, PVA |
Nozzlediameter: | 0,4 mm |
Nozzletemperatuur: | 180 - 280 ºC |
Opwarmtijd nozzle: | < 2 min |
Opwarmtijd platform: | < 4 min (20->60 ºC) |
Gemiddeld geluidsniveau in bedrijf: | 50 dB(A) |
Materiaalopslag: | • Open, spoelhouder incl. materiaalgeleiding voor 2 spoelen van maximaal 750 g <br>• NFC-systeem voor automatische detectie van het Ultimaker-materiaaltype |
Connectivitie: | Wi-Fi, Ethernet, USB |
Camera: | Ja |
Afmetingen printer buitenzijde (incl. bowden-buis en spoelhouder): | 34,2 x 50,5 x 58,8 cm (DxBxH) |
Afmetingen printer buitenzijde (excl. bowden-buis en spoelhouder): | 34,2 x 38,0 x 38,9 cm (DxBxH) |
Nettogewicht: | 10,6 kg |
Gewicht verpakt: | 15,5 kg |
Afmetingen verpakking: | 39,0 x 40,0 x 56,5 cm (DxBxH) |
Ingangsvermogen: | 100 - 240 V<br>4 A, 50-60 Hz<br>max. 221 watt |
Uitgangsvermogen: | 24 V DC, 9,2 A |
Bedrijfsomstandigheden: | 15 - 32 ºC <br>10 - 90% relatieve vochtigheid zonder condensatie. Vanaf ±50% relatieve luchtvochtigheid ontstaan er problemen met PVA. <br>Raadpleeg de materiaalspecificaties voor de optimale bedrijfsomstandigheden |
Opslagomstandigheden printer: | Opslagomstandigheden printer |
Meegeleverde software: | • Cura 2 - Officiële Ultimaker-software <br>• Geschikt voor dubbele materiaalinvoer |
Ondersteunde besturingssystemen: | Windows, Mac, Linux |
Bestandstypen: | STL, OBJ, 3MF |